More Misadventures in Appliance Repair: The Oven

I was trying to cook dinner one night and just not making much progress. The pork chops were still pink inside after what seemed like a long time. And the apples underneath them were still crunchy. I couldn’t understand why.

And then Mr. FP realized that the top heating element in our oven (it’s called the broil element, and you should remember that because it’s going to be important later in the story) was not working. The bottom element was working, so the oven felt generally hot, but it was not hot enough to cook pork chops. I finished dinner in the toaster oven.

So I needed a new heating element. No problem; I did a little Internet searching and ordered the cheapest new OEM part. In the meantime, at least I could use the toaster oven and the cooktop, right?

That was true until I blew the circuit breaker. When the new part arrived, I flipped off the circuit breaker, then I remembered I wanted to use the stove and tried to flip it back on. Except it wouldn’t go back. It was stuck in the middle, tripped position.

Also, I had ordered the wrong part. I had ordered the BAKE element; I needed the BROIL element. Silly me, thinking they would be interchangeable.

Well, I know my limits. The thing about electricity is that if you do it wrong, you burn your house down. So I called an electrician to replace the circuit breaker. It wasn’t done quite right before and neither was the one for the dryer, so he fixed, that, too. This repair totalled a princely $311. Evidently my circuit breakers are manufactured by unicorns.

The electrician informs me it is not uncommon for a bad oven heating element to take the circuit breaker with it. I am told that in the future, immediately cutting power and not using any part of the range until it is repaired may spare the breaker.

A few days later, the correct part arrived. (The part was $40 and it cost me $12 to ship back the one that was wrong, for a total cost of $52.) I flipped off my brand-new circuit breaker and removed the old element. Here, I hit a snag. See, here’s the number one rule of replacing oven heating elements: Do not let the wires fall back inside the oven.

20160308_151457

Close-up of the hole that the wire had fallen through, seen from the back. The little metal doodad you see hanging down is what connects to the element.

You see where this is going, right? Well, when pulling out the old element caused the wires to snap back inside the oven, I nearly despaired and called a repair person. Then I thought, well, how would the repair person get those wires out? I asked Google. Turns out all I had to do was pull the oven out from the wall and remove the back. Now, I could tell this wasn’t going to be hard because it came off with a regular screwdriver. I have a theory that when a manufacturer wants to keep you from messing with something, they use oddly shaped screws. (Like the star-shaped screwdrivers I needed to take my dishwasher apart.)

Once the back was off, I easily located the wires. It actually made installing the new element easier, because I could attach the wires from behind the oven rather than inserting the top half of my person inside the oven. My arms aren’t long enough, anyway. Several more minutes with the screwdriver and we were back in business.

20160308_151754

Re-assembled back of oven. Sorry for bad photo quality–as you can imagine, it was dark behind my oven. And kinda filthy.

I don’t know how much money we saved, paying for the circuit breaker but fixing the oven myself. But I had a plumber at my house a few months ago and I asked him how much it would cost if, in addition to the job for which I had hired him, he also tightened my loose faucet. To tighten this screw, he said, he would charge $179. So I’m guessing I saved three figures.

And equally importantly, it was extremely satisfying. I would like it noted that at no point did I ask for or receive any assistance from Mr. FP. This was my show.

What home repair successes or debacles have you experienced recently?

Advertisements

Tags:

About frugalparagon

I'm a part-time librarian and mom to two small boys. I blog about striving for the long-term goal of financial independence while running a tight ship at home.

One response to “More Misadventures in Appliance Repair: The Oven”

  1. Tara Allen says :

    Repairs, I think are essential in keeping your appliances working. Getting repairs done frequently sounds like a good way to extend the life of your appliances. Understanding the basic functions of your appliance is a good way to avoid creating problems.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: